BeeProg3 Universal offline Programmer

Short description：

"Ultra speed universal 64-pindrive programmer, 

design focused on high-capacity memories programming."

Total supported devices: 14669 from 128 manufacturers (Date: 28. Jan. 2016)

Features：

the BeeProg3 was designed meticulously with attention to details, quality and reliability

the programmer perfectly fits for high-demanding desktop programming, as well as for automated programming systems

based on a state of the art FPGA design, powerful ARM processor and internal SSD, the BeeProg3 is ready to program devices at theoretically possible speeds

64-pins rich-features, precise and powerful pindriver provides programming signals for every technology of programmable devices

logic signals frequency up to 125MHz at 3.3V and 80MHz at 5V

it supports devices with VCC voltages as low as 0.8V

ultra fast programming speed, one of the fastest programmers worldwide. Sustainable programming speed greater than 31 MBytes per second

the 8 GB eMMC NAND Flash could be done in less than 250 sec, if supported memory is fast enough

it utilizes both universal programming modules, dedicated for IC package type and specialized modules, designed optimized for specific device families

ESD protection on each pin of the pindriver

dual connection to the PC: USB (2.0 HighSpeed) and LAN (100 Mbit)

comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10(32-bit and 64-bit)

unique quick reaction to customer's needs - software update can be ready within a day from request, by OnDemand software

Multiprogramming possible by attaching more programmers to one PC

developed and made in Slovakia

warranty - 2 years

Optional accessories:

Optional accessories: Vacuum pen, ...

Product specifications：

PC system requirements

Common, software related requirements

Programmer hardware related requirements:

either one USB port, 2.0 compatible or one LAN port

Operation

operating voltage 100-240V AC rated, 90-264 VAC max., 47-63 HZ

power consumption max. 25W active, about 5W sleep

dimensions 139,5 x 189,5 x 48,5 mm (5.5 x 7.5 x 1.9 inch). 

Dimensions were measured without programming module inserted and does not include projections. Total height of BeeProg3 programmer with programming module inserted depends on height of ZIF socket on the module and can vary between 66-78 mm.

weight of programmer without programming module: 1.25kg (2.75 lb)

operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)

operating humidity 20%..80%, non condensing

Package includes (programmer and standard accessories):

BeeProg3 programmer

power cord (Europe / USA / Japan)

connection cable PC-programmer, USB port

diagnostic pod for selftest of the programmer and test of the calibration (AP3 diagnostic pod, 1x)

programming module fixating screw (1x)

quick start guide

CD with software and user's manual

calibration test report

sticker "register your programmer" (1x)

information leaflet "Notes about ESD" (1x)

transport case (cardboard box)